Electrochemical dissolved oxygen sensors are the most widely used sensors because they can be employed in situ for laboratory, automation and online measurements. Our custom dO2 sensors are designed for rapid aqueous measurements.
We measure dissolved oxygen from 100 ppm to 100 %. They are 316S with a PTFE reinforced and exchangeable silicone membrane. These materials are generally-recognized-as-safe and meet the GRAS list. Designed for Biotech, they are used in microbial cultures, cell cultures, drinking water, wastewater, fermentation broths, beer, wine, and fruit juices. The dissolved oxygen probe can be used in hygienic environments with cGMP and FDA compliance with clean-in-place (CIP) design.
Contact our team today for defining the measurement parameters, shape, size and material compatibility for your new sensor.
Electrochemical dissolved oxygen sensors are the most widely used sensors because they can be employed in situ for laboratory, automation and online measurements. Our custom dO2 sensors are designed for rapid aqueous measurements.
We measure dissolved oxygen from 100 ppm to 100 %. They are 316S with a PTFE reinforced and exchangeable silicone membrane. These materials are generally-recognized-as-safe and meet the GRAS list. Designed for Biotech, they are used in microbial cultures, cell cultures, drinking water, wastewater, fermentation broths, beer, wine, and fruit juices. The dissolved oxygen probe can be used in hygienic environments with cGMP and FDA compliance with clean-in-place (CIP) design.
Contact our team today for defining the measurement parameters, shape, size and material compatibility for your new sensor.
- Electrode for ultrarace oxygen measurementeasy to clean and high precision
- Electrode can be used for hygienic applicationsaccording to cGMP and FDA conform, clean surface with high resistance
- Long lasting designStainless steel 316L can be sterilized and autoclaved
- Easy integration into your processwithVarioPin VP4 and PG 13.5 connector
- Short down time thanks top clever designwith exchangeable membrane module
| Industry | Biotech |
| Measuring range | 100 ppm – 100% O2 |
| Membrane | Silicone |
| Shaft material | Stainless steel 1.4404, Ra ≤ 0.4 |
| Temperature sensor | Pt1000 |
| O2 Electrolyte | Alkaline KCI solution |
| Temperature range | 0 – 50 °C |
| High temperature (autoclavable) | <20 min 121°C |
| Max pressure during measurement | 4 bar
|
| Shaft diameter
| 12 mm |
| Sensor connector | VarioPin VP4, PG 13.5 |
| Output signal | Analog |
| Min. immersion depth
| 10 mm |
| Length (mm) | 120, 225, 325, 360, 425 |
| ATEX | No |
To get in contact with an m-oem expert, please fill in the form and we will get in touch with you shortly.
